Makita

Makita HR4013C 1-9/16" AVT Rotary Hammer. Makita's Anti-Vibration Technology (AVT) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s It has a Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control for more convenient operation. The Electronic Controller provides Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs. The Soft start suppresses start-up reaction for more control and better accuracy. The L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced. The L.E.D. power light indicates switch failure or cord damage. Variable speed control dial enables user to match the speed to the application for greater versatility.

The 18V LXT® Brushless ½” Driver-Drill (XFD14Z, tool only) is an ideal premium drilling and driving solution. The XFD14Z delivers 1,250 in.lbs. of Max Torque. It has a 2-speed transmission (0-550 and 0-2,100 RPM) for a wide range of drilling and fastening applications. The all-metal ½” self-ratcheting chuck provides improved bit gripping strength and durability. It weighs 5.7 lbs. with battery yet is more compact than previous models. It’s part of Makita’s expanding 18V LXT System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita® 18V LXT® Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita® 18V LXT® Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.

Trades of all kinds utilize oscillating multi-tools for a range of applications. The 18V LXT® Sub-Compact Brushless Multi-Tool (XMT04ZB, tool only) delivers corded speed and power without the cord. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class cordless multi-tool. The multi-tool features variable speed control dial (10,000 – 20,000 OPM) with soft-start so users can match the speed to the application. It’s equipped with Anti-Vibration Technology (AVT®), an internal counterbalance system engineered to reduce vibration. It has a 3.6-degree oscillation angle for faster, more aggressive cutting and sanding. The small diameter barrel grip provides improved handling and a large on/off slide switch with lock-on button provides convenience. The XMT04ZB features the StarlockMax® System, a tool-less clamp system for faster accessory installation. When used with Starlock® Oscillating Multi‑Tool Accessories, this oscillating multi-tool is ideal for cutting, sanding, scraping, grout removal, and many more applications. The LXT® System is the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita’s purpose-built motors, battery technology, and enhanced communications work together to deliver maximum performance and efficiency. The LXT System offers cordless tools, equipment, and accessories for every trade. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. Look for Makita® 18V LXT® Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.

The Makita 18V X2 (36V) LXT Brushless 6-1/2” plunge Circular saw kit (XPS01PTJ) delivers precise and more accurate cutting when combined with an optional guide rail system (sold separately). the saw and rail system work together to produce accurate cuts with minimal tear-out. The saw combines a powerful Makita-built Brushless motor powered by two 18V LXT batteries with automatic speed Change technology, which adjusts cutting speed and torque during the cut for optimum performance. The saw has a variable speed control dial (2, 500 – 6, 300 RPM), with soft start and an Electric brake for added convenience. It has a large 2-3/16” cutting capacity at 90 degrees, with a bevel capability of -1° to 48° and positive stops at 22.5° and 45°. when used with a rail system (sold separately) the plunge Circular saw is a more portable option to a Table saw for select applications, and is ideal for use on the job site or in a workshop. The kit includes two 18V LXT 5.0Ah batteries, and each reach a full charge in only 45 minutes on the efficient Rapid optimum charger – the fastest charge-time in the Category – for less downtime and increased productivity. For added convenience, the batteries feature an integrated L.E.D. Battery charge level indicator. It's part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls . Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

For straighter, more accurate cutting in vertical and overhead applications, Makita has a solution with the 18V LXT Lithium-Ion cordless cut-out saw (model XDS01Z, tool only). it’s designed to cut openings in installed board, including drywall and plywood, and will cut up to 984 feet of ½” drywall on a single charge using a 4.0Ah battery (sold separately). to help prevent damage to objects behind the board being cut, it has a short ¼” stroke length with an adjustable blade depth up to 1-3/16" (9/16" in wood). for improved dust extraction, the XDS01Z has a dust port with a clear dust box for increased visibility. It is ideal for cut-outs and drywall repair applications.

18V LXT® 2-Pc. Combo Kit (5.0Ah) delivers two premium brushless tools for drilling, driving, and fastening. The Kit includes two 18V LXT® 5.0Ah batteries, which are compatible with the full range of Makita tools and products. The kit includes an 18V LXT® Brushless Cordless ½” Hammer Driver-Drill (XPH14) delivering a full 1,250 in.lbs. of Max Torque for the most demanding drilling and driving applications and 0-31,500 BPM for faster hammer drilling into masonry materials. The XPH14Z is positioned at the top of the LXT line-up of driver-drills. The 1/2” Hammer Driver-Drill has a more compact and ergonomic design and is 14% shorter than the previous model. It's powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. With a 2-speed transmission (0-550 & 0-2,100 RPM), the XPH14Z can tackle a wide range of drilling, fastening and hammer drilling applications. Other features include an all-metal ½” self-ratcheting chuck for improved bit-gripping strength, L.E.D. lights, and a rubberized soft grip for increased comfort. The Kit also features an 18V LXT® Brushless 4-Speed Impact Driver (XDT20) sets new standards. The XDT20 offers 4-speed power selections (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) which provides precise fastening control for a wide range of applications. The Impact Driver features Assist Mode (A-mode) which helps eliminate ""screw cam-out"" and ""cross threading"" by driving at low speed until tightening begins. It also features two Tightening Modes (T-mode) for faster tightening of self-drilling screws in thick or thin gauge metal that helps prevent damage to the screw or workpiece. The XDT20 delivers industry-leading performance in a compact and ergonomic design.

The Makita 1-3/4" Roofing Coil nailer (model AN454) combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter Coil roofing nails from 3/4” to 1-3/4” nails in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. Ease-of-use features include a "tool-less" Depth adjustment engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool.

The 18V LXT® 2 Pc. Combo Kit (3.0Ah) (XDT131X2) is an ideal drilling and driving solution for the user who wants a drill with superior power-to-weight ratio with a versatile flashlight for a variety of lighting needs. The 18V LXT® Brushless Impact Driver (XDT13) combines power and run-time for a full range of fastening tasks. The efficient Makita-built Brushless Motor is electronically controlled and engineered for longer run time, increased power and speed, and longer tool life. The variable speed brushless motor delivers 0-3,400 RPM, 0-3,600 IPM, and up to 1,500 in.lbs. of max torque for efficient fastening. It has a compact design at 5” long and weighs only 3.3 pounds (with battery) with an ergonomic soft grip for user comfort. The L.E.D. light illuminates the job area for applications in dark spaces.Also included in the Kit is the Makita 18V LXT® Compact L.E.D. Flashlight (DML186W) which provides hours of illumination without a cord. It features a compact and ergonomic design for ease of use, with a strap for convenient operation. The flashlight is compact yet bright, with 6 L.E.D. that delivers up to 55 hours of run time on a fully charged 18V 3.0Ah Lithium-Ion battery. For extended run time, it can also be powered by Makita's other 18V Lithium-Ion batteries (sold separately).Both the XDT131X2 and the DML186W are compatible with Makita 18V LXT® Lithium-Ion batteries, from the fast-charging 18V LXT® Compact 2.0Ah battery to full-size 18V LXT® batteries for longer run time. The kit includes an efficient 18V LXT® 3.0Ah battery that reaches a full charge in only 30 minutes for less downtime and increased productivity.

The 18V LXT® 2” Brad Nailer, 18 Gauge (XNB04) delivers class-leading cordless performance with up to 2x faster nailing speeds* and can powerfully drive nails sub-flush in both hardwood and softwood applications. The 2” Brad Nailer features a slim nose design that allows easy nailing access in confined areas and assists with accurate nail placement. The XNB04 features an ultra-compact ergonomic design and weighs only 6.1 lbs. with battery for improved maneuverability (battery sold separately). It is equipped with an anti-dry fire mechanism engineered to help prevent driving blanks. The 2” Brad Nailer features a two-mode selector switch that allows the operator to select sequential nailing or bump fire options. The Brad Nailer features a “tool-less" depth adjustment engineered for more precise flush and countersink nailing. The XNB04 is engineered to drive the most nails per charge in its class; up to 4,250 nails per charge with a 5.0Ah battery and 1,700 nails with a 2.0Ah 18V LXT® battery. (batteries sold separately). It drives a range of 18-gauge brad nails from 9/16" to 2" with a magazine capacity of up to 110 nails. It features a "tool-less" easy to clear nose for fast nail extraction. The 2” Brad Nailer features a non-marring rubber nose and bumpers protect the wood surface from being scratched or damaged and includes two removable no-mar tips with convenient on-tool storage. Convenience features include a built-in L.E.D. light illuminates the work area, a belt hook that secures the tool when not in use, and an ergonomically designed handle with rubberized soft grip provides increased comfort. The Brad Nailer was engineered to be cordless for increased convenience to eliminate the need for a compressor and air hose, giving the user greater mobility for a variety of applications. *Compared to Makita LXT Model XNB01Z

The 18V LXT Brushless 2 gallon HEPA filter portable wet/dry dust extractor/vacuum, tool only (XCV11Z) is a powerful, portable solution in dust management applications. The XCV11Z captures 99. 97% of particulates. 3 microns and larger with the efficient HEPA filter. It’s compact and cordless design with a shoulder strap (sold separately) allows easy transport of the vacuum throughout the space for efficient use. Get up to 60 minutes of continuous run-time and up to 57 CFM and 27” water Lift of suction with just one 5.0 Ah battery (sold separately).

The Makita 18V LXT Lithium-Ion Brushless cordless ½” driver-drill kit (XFD131) is an ideal drilling and driving solution for the user who wants a drill with superior power-to-weight ratio. The XFD131 combines 440 in. Lbs. Of max torque with an efficient Brushless motor that delivers up 50% more work per charge, increased power and speed, and longer tool life. For the Pro user, this means more drilling and driving power, greater productivity, and fewer trips up and down the Scaffolding or ladder to get to the battery charger. In driver mode, the adjustable torque settings provide more control for a full range of applications, from large fasteners to smaller, delicate screws. It weighs only 3.8 lbs. (With 3.0Ah battery) for increased comfort and superior power-to-weight ratio. The XFD131 is compatible with Makita 18V LXT Lithium-Ion batteries, from the fast-charging 18V LXT compact 2.0Ah battery to full-size 18V LXT batteries for longer run time. The kit includes an efficient 18V LXT 3.0Ah battery that reaches a full charge in only 30 minutes for less downtime and increased productivity. It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls. Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

Build your own Makita tool kit with the 18V LXT Lithium-Ion battery and dual port charger Starter pack (5.0Ah). Makita offers over 150 cordless tools and most are available as "bare tools" (tool only, no batteries or charger included). pick up the Starter pack, then purchase the 18V "bare tools" you need to get the job done – including 18V X2 LXT tools powered by two 18V batteries. It's an ideal way to start building a Makita cordless tool line-up. Makita 18V Lithium-Ion batteries resist self-discharge so they're ready for use even after long periods of storage. The Rapid optimum charger is a smart-charging system that communicates with the battery during charging to monitor current, voltage and temperature. This advanced charging technology helps optimize battery life and deliver a faster charge. The 18V dual port Rapid optimum charger (dc18rd) charges 2 batteries simultaneously, giving tool users unparalleled charging efficiency so their batteries spend more time working and less time sitting on the charger.

The Makita 23 lb. AVT Demolition Hammer has a powerful 14 AMP motor that delivers 18.8 ft.lbs. of impact energy to handle the most demanding applications. It weighs 23.8 lbs. The demolition hammer features Anti-Vibration Technology (AVT ) and vibration-absorbing rear handle to further reduce vibration. Constant speed control that automatically applies additional power to the motor to maintain speed under load to complete challenging jobs and a variable speed control dial enables users to match speed to the application. The HM1213C has a "soft no-load" function automatically reduces the speed of the motor when not in use which helps increase tool life and performance. The Makita Motor is engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life.Other features include an L.E.D. power light to indicate switch failure or cord damage and an L.E.D service light that notifies the user that the brushes need to be replaced. An automatic brush cut-off protects the commutator from damage for longer tool life. The 12 bit angle settings allows the bit to be set a different positions for operator comfort.Anti-Vibration Technology (AVT ) is a counterbalance system inside the tool that significantly reduces vibration. The AVT counterbalance design is based on seismic engineering, which developed this damping science to absorb shocks and protect buildings from earthquakes. AVT uses a mechanical damper, effectively a counterbalance weight inside the tool, that provides an equal and opposite force that puts a mass directly opposite the point where the striker bolt delivers the impact. As vibration is eliminated, power is efficiently increased which allows more of the generated energy in the motor to be delivered to the tool bit. For users, AVT means significantly less vibration with no compromise in power and performance.

The Makita DHP489Z combi drill from Makita features a powerful brushless motor. Despite increased efficiency, the overall length is shorter than that of Makita's current model due to optimally redesigned gear assembly. With variable 2-speed for a wide range of drilling, fastening and hammer drilling applications and built-in twin LED light with pre-glow and afterglow functions illuminates the work area. Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions. Without battery and charger

Get outside with Outdoor Adventure™, a new series of cordless products that operate within the LXT® system. Outdoor Adventure Products feature advanced technology, delivering maximum performance and efficiency for the outdoors. Makita offers hundreds of products within the 18V LXT® system so you can create your own adventure. Clean up dirt and liquids from your tent, car, canoe, and more with the Outdoor Adventure™ 18V LXT® Brushless Wet/Dry Vacuum (ADCV11). The compact and cordless design with shoulder strap (sold separately) allows easy transport of the vacuum for efficient use. Get up to 60 minutes of continuous run-time and up to 57 CFM and 27” water lift of suction on a single charge of one 18V LXT® 5.0Ah battery. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is a communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging, and overheating. For increased versatility, the tool can also be powered by Makita LXT® Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside. It’s part of Makita’s expanding 18V Lithium-Ion System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita 18V LXT® Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

Get outside with Outdoor Adventure™, a new series of cordless products that operate within the LXT® system. Outdoor Adventure Products feature advanced technology, delivering maximum performance and efficiency for the outdoors. Makita offers hundreds of products within the 18V LXT® system so you can create your own adventure. The Outdoor Adventure 18V LXT® High Speed Blower/Inflator (ADSA01Z) is a handheld solution with a convenient in-line design for focused dust and debris removal. The Makita-built brushless motor delivers up to 447 MPH and 39 CFM with four digitally controlled speeds for a wide range of applications. The High Speed Blower/Inflator delivers up to 55 minutes of continuous run time with a fully-charged 18V LXT® 6.0Ah battery (battery not included). It includes five nozzles for a range of applications. Convenience features include a rubberized soft grip for comfort, a built-in L.E.D. light that illuminates the work area, and a compact length of only 7” making it ideal to use in tight spaces. It also features a filter on the blower intake that reduces dust being blown around when in use. It’s part of Makita’s expanding 18V Lithium-Ion System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita 18V LXT® Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

Makita’s 18V LXT® Lithium-Ion Brushless Cordless 4-speed 1/2" Sq. Drive Impact Wrench w/ friction ring anvil, Tool Only (XWT14Z) provides improved fastening control, ideal for automotive, installation, and fabrication trades. The impact wrench combines extended run time and speed control for unmatched fastening performance. It is powered by a Makita-built brushless motor for longer run time. The brushless motor delivers 240 ft.lbs. of Max Torque and 430 ft.lbs. of nut-busting torque. Precise fastening control is achieved through the 4-speed power selection switch, which accounts for a wide range of applications. Three forward and three reverse rotation auto-stop modes offer increased efficiency when fastener is adequately loosened. The full-speed mode function reduces the trigger pull to reach full speed. The XWT14Z features Makita's extreme protection technology (XPT™), a protective seal inside the tool. It is designed to improve a tool’s operation in harsh conditions by channeling water and dust from key internal components. It is part of Makita’s 18V LXT system. The LXT Cordless system, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries, takes a user from power tools to outdoor power equipment to get the job done. Makita 18V LXT Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. Batteries are sold separately. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.

The Makita 18V X2 LXT® Lithium-Ion (36V) Brushless cordless 1/2 gallon HEPA filter backpack dry vacuum (tool only, batteries and charger sold separately) is a powerful and portable clean-up solution that eliminates extension cords that trail corded backpack vacuums. It's also a powerful and portable Dust extraction solution for contractors by bridging the gap between low-capacity on-board dust extraction systems and larger capacity but less portable wheeled canister job site vacuums. The backpack dry vacuum kit is ideal for cleaning crews, as well as for construction applications When used as part of a dust extraction system. The backpack dry vacuum is powered by two 18V Lithium-Ion batteries (sold separately) for 36V power and performance but without leaving the 18V LXT® battery platform. The efficient BL™ Brushless motor generates 70 CFM of suction and 44” of static water lift for fast clean-ups and improved dust extraction, with No Cord to pull along or get in the way. The backpack dry vacuum weighs only 9.9 lbs. (With empty dust bag and two 18V 5.0Ah batteries, batteries sold separately) and has padded shoulder straps and waist belt with multiple adjustments for a comfortable fit. Cordless and compact, the push button power selection controller attaches to the waist belt of the harness for convenient operation, and the 39” flexible hose has a telescoping extension wand with 20” – 34” of additional reach. The efficient HEPA filter captures 99.97% of particulates .3 microns and larger extending the life of the main filter, and the half-gallon dust Collection container is easily removed for dust disposal. When using two 18V 5.0Ah batteries, users will get up to 116 minutes at normal setting and 33 minutes at max setting of continuous operation. It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls™. Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

Product Description The Makita Plate Joiner (model PJ7000), combines power and precision with ease-of-use features for strong and accurate biscuit joints for furniture making, cabinet construction and fine woodworking applications. The PJ7000 has powerful 5.6 AMP motor with 11,000 RPM for quick and precise cutting in a variety of woods. The rack-and-pinion vertical fence system is engineered for accurate fence adjustments, and the cast aluminum pivot fence has three positive stops at 0 degrees, 45 degrees, and 90 degrees. The blade diameter is 4 inches with a maximum cutting depth of ¾ inches, and there are six depth settings with one-touch stops for the most common biscuit sizes including #0, #10 and #20. The non-marring rubber inserts on the shoe are engineered to prevent material from slipping, and the “tool-less” blade cover and shaft lock allow for easy blade changes. Additional features include easy-to-operate cam locks for quick fence adjustments, a large top grip handle for improved handling, and a slim ergonomic body design. From the Manufacturer Makita's new PJ7000 Plate Joiner has an aluminum front body for added durability. It also has a toolless blade cover and shaft lock for fast and easy blade changes.

The Makita 18V LXT Lithium-Ion Cordless 1/2-Inch Hammer Driver-Drill combines speed and torque in a compact size, with an efficient 2.0Ah battery that reaches a full charge in only 25 minutes. For increased versatility, it can be run as a driver-drill or a hammer driver-drill, and is engineered for applications in wood, metal, masonry, and concrete. The Makita-built four-pole motor that delivers 480 in.lbs. of Max Torque and up to 1,900 RPM and 28,500 BPM in the high-speed setting. It weighs only 3.4 lbs. for increased comfort. With Extreme Protection Technology (XPT), the drill is engineered for increased dust and water resistance and is ideal for use in harsh jobsite conditions. It's part of Makita's expanding 18V Lithium-Ion series, the world's largest cordless tool line-up powered by an 18V Lithium-Ion slide-style battery. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside. Please review User Manual to understand proper safety measures and operational guidelines of this tool.

Inflate car tires, bike tires, or sports balls quickly with the 18V LXT® Cordless Inflator. The Makita-built motor delivers up to 160 PSI. An auto-stop function automatically stops inflation when the preset air pressure is obtained. This helps prevent overfill. There are three speed settings: high, medium, and low. The inflator also features an air-release button, high visibility pressure gauge display with backlight, and an L.E.D. light to illuminate the work area. A 25-1/2” hose length provides better reach. The compact design allows for easy portability and convenient storage. It’s part of Makita’s expanding 18V LXT® System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita® 18V LXT® Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita® 18V LXT® Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.

Product Description Value-priced, high quality tools - leading the market by ensuring that products are rugged, reliable and reasonably priced. From the Manufacturer 1/2" Spade handle drill with powerful 8.5 amp motor engineered for improved drilling and mixing performance.

features and benefits: powder - conveniently located speed dial (1, 600 - 6, 800 OPM) enables operator to match speed to application

The Makita 18V compact Lithium-Ion cordless vacuum kit, model XLC02RB1W, is a compact and powerful cordless vacuum with strong suction for fast and efficient cleaning. At only 18-3/4" In length This compact vacuum can be used as a "hand-vac", or with the floor nozzle extension for floors, carpets, and hard-to-reach spaces. The XLC02RB1W is a kit and includes the fast-charging 18V compact Lithium-Ion battery and efficient Rapid optimum charger. It's part of Makita expanding 18V Lithium-Ion Series, The world's largest cordless tool line-up powered by an 18V Lithium-Ion slide-style battery. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls. Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

Makita created a new class in cordless with 18V LXT sub-compact tools. Makita sub-compact gives users 12V handling with 18V performance and compatibility with the world’s largest 18V cordless tool system. The 18V LXT sub-compact Brushless 11/16” rotary hammer (accepts SDS-Plus bits) is ideal for working in tight spaces and for overhead conditions. The XRH06ZB has an efficient Makita BL Brushless motor for up to 50% longer run time, increased power and speed, and longer tool life. It has 2-mode operation for “rotation only” or “hammering with rotation”, with 0-680 RPM, 0-4, 800 BPM and .81 ft.Lbs./1.1 Joules of impact energy for fast and efficient drilling. The compact size and lower weight mean reduced fatigue for operators, especially for overhead applications. Additional features include a vibration-absorbing handle that moves independently of the motor and hammer mechanism for increased operator comfort, as well as a variable speed trigger, built-in L.E.D. Lights, and one-touch sliding chuck for easy bit changes. It’S part of Makita’s expanding 18V LXT system, the world’s largest cordless tool system powered by 18V Lithium-Ion batteries. Makita 18V LXT batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls. Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

Makita, a pioneer in Brushless motor technology and battery innovation, combines both in the 18V LXT Lithium-Ion Brushless reciprocating saw (tool only). It has an electronically-controlled BL Brushless motor that matches torque and RPM to the application, and is powered by the industry fastest charging 18V Lithium-Ion batteries (sold separately). with Makita, users can remain in one battery platform, using the same fast-charging 18V batteries on the XRJ05Z As they use across the Makita 18V LXT cordless tool line-up. The XRJ05Z is equipped with efficiency features for faster cutting. The long 1-1/4” stroke length increases cutting efficiency, and the refined crank mechanism design minimizes blade deflection and reduces vibration. Convenience features include an L.E.D. Light to illuminate the line of cut, a retractable tool hook, and "tool-less" Blade Change for faster blade installation and removal.

The 18V LXT® Brushless Cordless 1” Rotary Hammer with HEPA Dust Extractor (XRH01ZWX, tool only) is a cordless concrete drilling solution powered by an efficient Makita-built brushless motor for up to 50% longer run time, increased power and speed, and longer tool life. The XRH01Z delivers 0-950 RPM, 4,700 BPM, and 1.7 ft.lbs of impact energy. Ease-of-use and efficiency features include 3-mode operation (rotation only, hammering with rotation and hammer only), a large 2-finger trigger for more convenience and greater comfort, and a depth adjustment guide for increased drilling depth accuracy. The XRH01ZWX comes with an OSHA Table 1 compliant on-board dust extractor which includes a filter cleaning mechanism designed to help maintain optimum suction efficiency. It’s part of Makita’s expanding 18V LXT System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita® 18V LXT Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.

The Makita® 18V LXT® Lithium-Ion Cordless 1/2” Impact Wrench Kit (XWT04S1) delivers high torque impact power with a ½” square drive that will fit impact-rated socket sets. The versatile XWT04 packs plenty of torque for a wide range of fastening and loosening tasks and is a powerful and convenient substitute for air powered and AC wrenches. Makita-Built Motor Engineered for Versatile Power The XWT04S1 features a Makita-built high torque motor that delivers 325 ft. lbs. of Max Torque, 1,600 RPM’s, and 2,100 impacts per minute for a wide range of fastening tasks, including removing transmission bolts and lug nuts. The unique rubber joint shock absorbent handle helps protect the battery housing from vibration. Ergonomic Design in a Compact Size The XWT04S1 weighs just 7.5 lbs. and is 10-1/2” long with an ergonomic shape that fits like a glove for reduced operator fatigue. The XWT04S1 is equipped with a large rocker switch for easier tool use – even with gloves – and a 1/2” square drive with detent pin is designed for quick release. A built-in L.E.D. light illuminates the work area for more efficient work. Versatile Design for a Range of Applications The XWT04S1 is a cordless option to air powered and AC impact wrenches. It is engineered for a range of fastening and loosening tasks and is perfect for steel beam construction, I-beam construction, utility pole, telephone and cell phone pole installation, overhead door installation, mudsills, automotive work, conveyor systems, HVAC, fire sprinklers, oil fields and refineries, anchors, tilt-up construction, and more. It is ideal for steel contractors, commercial contractors, automotive line assemblymen, automobile mechanics, residential contractors, HVAC contractors, and any pro tradesman requiring a best in class engineered impact wrench. Tool Technology For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita® 18V LXT® Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside. LXT System It’s part of Makita’s expanding 18V LXT® System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita® 18V LXT® Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

The Makita 1-3/8" Magnetic Drill cuts holes in steel up to 1-3/8" diameter and 2" thick. The 10-amp motor delivers 850 RPM for enhanced cutting speed. The motor height adjusts for various cutting thickness. It weighs less so that the user can comfortably work in tight spaces or overhead, and for easy portability. The industrial chuck accepts 3/4" Weldon Shank Cutters. The drill features a magnetic base, which produces powerful clamping force for increased accuracy and stability while drilling, and a dovetail slide mechanism for smooth and consistent drilling performance. The removable guard isolates the cutting mechanism while rotating. A spindle coolant system with removable reservoir provides improved cutting performance. Removable feed handles allow for convenient storage.

Amazon.com The Makita 20-pound demolition hammer features a powerful 10 Amp motor that provides fast and efficient operation. For user comfort and convenience, the rubber grip side handles absorb vibration and can be secured in four positions. This tool has been factory grease packed for reduced maintenance and it has an automatic brush cut-out when periodic servicing is due. It accepts commonly used 3/4-inch steel and measures 19-5/16-by-5-11/16-by-9-13/16 inches (length by width by height) and is backed by a one-year warranty. What's in the Box Demolition hammer, hex wrench, and plastic tool case. Product Description The air-cushioned Makita 10 amp demolition hammer (model HM1211B) delivers 2, 000 BPM and 10.5 ft.Lb. Of impact energy (14.2 Joules) for demanding concrete applications. The D-shaped handle is engineered to help absorb vibration, while the one-touch latching retainer allows easy bit changes. The hex-style chuck accepts 3/4 in. Steel bits.

The 12V max CXT Lithium-Ion Cordless 3/8" / 1/4" Sq. Drive Ratchet Kit (RW01R1) is designed to loosen nuts and take the nut off the bolt. This ratchet features interchangeable 3/8” and ¼” anvils for versatility. The kit includes the ratchet, 12V max CXT Lithium-Ion 2. 0Ah Battery, 12V max CXT Lithium-Ion Charger, and two anvils. The powerful Makita-built motor delivers 35 ft. lbs. of Max Torque. When the motor is not engaged, the ratchet can be used manually. Operator fatigue is reduced when the motor is engaged and due to the lightweight, ergonomic design. The low profile design provides improved handling in tight spaces and for overhead applications. For longer run time, 12V max CXT cordless tools are also compatible with the 12V max CXT Lithium-Ion 4. 0Ah battery (BL1041B, sold separately). 12V max CXT Lithium-Ion Batteries are engineered with a Battery Protection Circuit that protects against overloading, over-discharging and over-heating. It’s part of the expanding 12V max CXT series, combining performance with superior ergonomics in a compact size.

Product Description The Makita HR4041C 1-9/16 in. Spline-Shank Rotary Hammer Drill features a powerful 11 Amp motor engineered with field-core interlocking steel laminations, a dual ball-bearing armature and a large-surface commutator for an efficient transfer of power. It delivers up to 230 - 460 RPM and 1,300 - 2,600 BPM and has 2 modes for hammering only and hammering with rotation. Soft-start functionality facilitates control and improved accuracy, while sequential impact timing promotes faster work. From the Manufacturer The Makita HR4041C 1-9/16-inch rotary hammer spline features a powerful 12 amp motor, 1,350-2,750 BPM, and anti-vibration technology for two times less vibration. A low noise level (106dB) and vibration (4.5 m/s2) reduces operator fatigue and increases productivity. The HR4041C also features precision-machined, all-metal gears with more surface contact for more power. Electronic speed control minimizes speed loss when working in heavy applications to ensure maximum productivity. Ideal for drilling through holes, setting anchors, core drilling, and many more applications.

Makita’s 7.2V Lithium-Ion cordless driver-drill kit with auto-stop clutch delivers convenience and precision drilling and driving power to torque-specific assembly applications. The DF012DSE combines the ultra-compact design of a cordless screwdriver with 21 clutch settings and an auto-stop clutch for extra fastening control. The DF012DSE is powered by a Makita-built motor that delivers 71 in.Lbs. Of max torque in drilling mode. The 2-speed gear selection offers 200 RPM and 650 RPM for low or high speed applications. The 21 clutch settings offer a range of fastening torque, from 32 in. Lbs. In clutch setting #1 to 50 in. Lbs. In #21. For added precision and control, the auto-stop clutch shuts off the tool when the clutch disengages and helps prevent over-driving on the fastener. For extra versatility, the tool will operate in straight or pistol grip positions. The DF012DSE weighs just 1.2 lbs. With a more compact design at only 10-3/4” long (in-line) and 8-5/8” long (pistol), with an ergonomic shape that fits like a glove for reduced operator fatigue. It is also equipped with a built-in L.E.D. Work light operated by a separate switch on the opposite side of the rocker, and provides illumination for more accurate work. The DF012DSE also includes a low battery indicator: the L.E.D. Light blinks when the battery needs to be recharged. The switch drive Lock prevents Active discharge in the case when not in use, and allows the tool to be a screwdriver in Lock position. The DF012DSE delivers versatile power combined with a compact design, dual position handle, and precision clutch settings for torque-specific assembly work.